Programming Tags

The Programming Tags are used to set the NCR 7877 program parameters. There are 30 Programmings Tags; some are for specific functions such as Volume Adjustment, Firmware Flashing, and so forth. Following are the Programming Tags; click the tag name to display the Programming Tag. Click the tag name a second time to hide the Programming Tag.

Note:  Before scanning a Programming Tag, configure the NCR 7877 to read a bar code from a mobile device display – Program Mode, Hex 8 , Hex E, Hex 1, Save and Reset.

ClosedVolume Adjustment

ClosedReset

ClosedDefault

ClosedProgramming Mode

ClosedEnd

ClosedSave and Reset

ClosedAbort

ClosedDiagnostic Mode

ClosedSpeak Scanner Serial Number

ClosedSpeak Enabled Bar Codes

ClosedMode 1

ClosedMode 2

ClosedReset Tallies

ClosedFirmware Flashing

ClosedHex 0

ClosedHex 1

ClosedHex 2

ClosedHex 3

ClosedHex 4

ClosedHex 5

ClosedHex 6

ClosedHex 7

ClosedHex 8

ClosedHex 9

ClosedHex A

ClosedHex B

ClosedHex C

ClosedHex D

ClosedHex E

ClosedHex F

 

Other Topics

User Information

Home Page

Scan Advisor

Identify specific Status indication

Scanner Diagnostic Codes

Identify specific Scanner errors

Scale Diagnostic Codes

Identify specific Scale errors

Troubleshooting

Identify Troubleshooting procedures